[Motherboard] How to enable “power on by PS/2 keyboard” via Bioses setting | Official Support

ASUS Support FAQ

FAQ

[Motherboard] How to enable “power on by PS/2 keyboard” via Bioses setting

First of all，the keyboard must support power on by keyboard, it must be the PS/2 keyboard!!

Memo：（1）ASUS Bioses can't support power on by USB keyboard！

（2）If not connect PS2 keyboard, you can't see the option of power on by keyboard！

The steps are below:

1. Press 'Del' or 'F2' in the keyboard after power on, enter into Advanced Mode:

Ordinary motherboard is defaulted to EZ Mode, need press 'F7' to enter into Advance Mode; ROG series motherboard is defaulted to Advanced Mode

PG赏金船长(中国)集团唯一官方网站

2. Click [Advanced] - [APM Configuration]

PG赏金船长(中国)集团唯一官方网站

3. Find [Power On By PS/2 Keyboard]

PG赏金船长(中国)集团唯一官方网站

4. The option is defaulted as [Disabled]，you can see four modes in the drop-down list: [Disabled]、[Space Bar]、[Ctrl+Esc]、[Power Key]，please set the mode that you want to power up

PG赏金船长(中国)集团唯一官方网站

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ