[Gaming Cases] TUF Gaming GT301 FIO Module Replacement Instructions

PG赏金船长(中国)集团唯一官方网站

    [Notice]  Do not pick TUF Gaming GT301 case up by the front fabric straps.

 

1. Preparation

  • Phillips Screwdriver PH2

 

2. Remove FI/O Module

 

     (1) Hold the notch at the bottom of the front panel (Remark 1) and pull it up(Remark 2), then remove the front panel

        PG赏金船长(中国)集团唯一官方网站

     (2) Remove two screws on the front (Marked in red)

         PG赏金船长(中国)集团唯一官方网站

     (3) Remove two screws near the top cover(Marked in red). It is recommended to place the case upside down for easier removal of screws.

         PG赏金船长(中国)集团唯一官方网站

 

3. Install Front Panel

    After I/O module is replaced, ensure all screws are locked. Press the two clips on the top of front panel back in place (Remark 3), and press two clips on the bottom of it back in place.(Remark 4). Now we have front panel installed. 

    PG赏金船长(中国)集团唯一官方网站

 

For product info, please visit http://www.stzgcm.com/Motherboards-Components/Gaming-Cases/TUF-Gaming/TUF-Gaming-GT301/